Used Milltronics Partner with Centurion I Control

1991 Milltronics Partner with Centurion I Control

$9,000 (USD)

Table Size: 54" X 16" | Table Max Load: 2500 LBS | Travels: 40" X 20" X 24" | Spindle Speeds: 60 - 4000 RPM

Details

Used 2005 Hurco VM2

2005 Hurco VM2

$18,500 (USD)

2005 Hurco VM2 with Hurco MAX Control. Chip Auger, 20 position tool changer Travels: 40" X 18" X 18" | Table...

Details

Used Tsudakoma RN-300R 4th Axis Trunnion

Tsudakoma RN-300R 4th Axis Trunnion

$3,500 (USD)

Tsudakoma RN-300 4th axis with Tunnion Table mounted on Subplate. Faceplate Diameter: 11.8"

Details

Used Sheldon 3R 15" Turret Lathe

Sheldon 3R 15" Turret Lathe

$3,500 (USD)

Swing Over Cross Slide: 8" | Turret Feed Travel: 10" | Hole thru spindle: 2.0" | Longitudinal travel carria...

Details

Used 2008 BIRMINGHAM Vari-Speed Knee Mill 6323A

2008 BIRMINGHAM Vari-Speed Knee Mill 6323A

$4,250 (USD)

X-Axis SERVO Power Feed, NEWALL DRO, 1-Shot Lube, Kurt 6" Vise Table area: 9" X 49" | Variable Speed Head: YES

Details

Used Peddinghaus 2R3 Hand Shear

Peddinghaus 2R3 Hand Shear

$400 (USD)

Width: 11"

Details

Used Libert 1060 Nibbler

Libert 1060 Nibbler

$3,950 (USD)

**Hard to find 60 in. Throat** Maximum Material Thiskness: 10 ga | Throat Depth: 60"

Details

Used 1980 Lagun FT-1

1980 Lagun FT-1

$4,800 (USD)

Details

Used 1995 Cosen TL-25 Turret Lathe

1995 Cosen TL-25 Turret Lathe

$1,950 (USD)

Cosen TL-25 Coolant, 6 position Turret Swing: 10.25" | Weight: 900 lbs | Main motor: 2 HP 230 volts 3 ph

Details

Used Cushman B-10 Power Chuck

Cushman B-10 Power Chuck

$500 (USD)

Model Number: 10-677-10-A08A | Draw tube OD diameter: Approx 3.00"

Details

Used Cushman B-10 Power Chuck

Cushman B-10 Power Chuck

$500 (USD)

Model Number: 10-677-10-A08A | Draw tube OD diameter: Approx 3.00"

Details

Used Kurt D80 8" Vises

Kurt D80 8" Vises

$450 (USD)

Details